I love Kino! I film all my wood carving videos with it for my Instagram profile [1]. I'm so glad to hear it's getting updates this year. If you're open to feedback: I like playing with white balance a lot, and it takes just a little too many steps in the current interface. I think Kino would benefit from having a "remember/preserve white balance" setting, and a gesture for changing it without tapping.
For example, I like how we can swipe down to show the exposure slider, then swipe left/right to adjust exposure. Maybe it would make sense to have these hidden sliders on all 4 sides: right side could show a focus slider, left side could be white balance etc.
In any case, even without that, it's my most used new app of the year. Thanks for giving us such a simple way to get good looking color grading out of the iPhone!
Damn, so this is the thing that caused all the floating windows to become unclickable and impossible to interact with... I'm the creator of the apps from https://lowtechguys.com/ and I was replying to 10-15 support emails per day, all week, because of this.
It's a bit scary to see that the software we rely on every day is such a complex behemoth that even a seemingly small change can have so large repercussions.
The problem is that AI only helps add even more complexity since it's so simple to just add more code now that we don't have to write it.
It feels like Apple has gone deeper and deeper into tech debt over at least the past decade, to the point where I see little prospect of their software reaching former quality levels again.
Notarization is mostly a glorified malware scan. There's no Apple engineer auditing what's being sent for notarization. Even clever malware can evade notarization scans and be distributed as a notarized binary, it has happened in the past [0]
There's no better way for auditing such an app than having the code easily available and looking through it, and compiling it yourself. Which is already the case here.
After a different company detected it, figured out what it did, and reported it to Apple. The app was notarized on November 17, screenshots in the researchers' post are from December 16. That's a month of fully notarized distribution.
This is the hardest thing about selling wooden spoons and especially cups. Like you, most people think about the rough texture they felt when using cheap or disposable wooden utensils.
My spoons and cups feel more like warm textured ceramic. They are sanded to a high 600 grit, water popped multiple times to make sure the grain doesn't raise and the texture stays smooth, and finished with drying oils as you see in the article to keep the surface highly hydrophobic.
I really can't describe it in words, but everyone I know who tried eating with my wooden spoons and drank from my coffee cups, was pleasantly surprised of the feeling.
That's why most of my sales happen in person at local craft markets, because there, people can take the cup into their hand, they can feel the smoothness, and they can ask about the same things you are worried about.
All I can recommend is find a spoon carver in your area, or one that ships there, and try a hand carved eating spoon. I'm not saying it's better than metal, ceramic or plastic, it's just a different experience that some people enjoy.
Some people react very badly, some are immune. But to be honest I just don't like my spoons and cups to look lacquered and I don't prefer the process of application.
Nothing wrong with that though, I like reading and watching people do the process and seeing them enjoy the calmness in doing dozens of layers over multiple days. Some end up with very beautiful shimmery brown wooden pieces [0] and I would love to own some of them. It's just not my style.
The problem with jojoba oil is that it doesn't polymerize or cure. It stays wet in the fibers. Nothing bad with that on wood that doesn't contact hot food and beverages.
But if you put wood treated with non-polymerized oil in a hot soup or if you pour hot tea into a cup finished with jojoba oil, the oil will get out of the fibers and into your hot liquid, the fiber will raise and the wood will start to feel rough after a few uses and start to get stained from your food and beverage.
Author here! Since the article publishing, I have found a widely available finish that's very similar to what I'm doing called Walrus Oil Furniture Butter: https://walrusoil.com/products/furniture-butter
It's still a combination of polymerizing oils, hard waxes and resin, it's just different plants (linseed instead of tung, pine resin instead of damar etc.) Again, no solvents, people say it smells good.
I still have way too much tung oil, wax and resin around because I could only buy high quantities, so I guess I'll keep using my own finish for a long while. But I'd love to hear from others how the Furniture Butter fares for wooden spoons and cups.
Osmo Polyx is what I already had around from other wooden furniture projects, that's all. I try to not store too many cans of unused finishes around my house so I try to use what I already have first.
Top Oil indeed seems very similar to what I did (hardwax, drying oils, driers) but half of it is still white spirit solvent, which I'm guessing will give it the same smell as Polyx.
Author here, it's not that it's not possible, it's just annoying to do. Indeed, two-component hardwax oils are close to perfect (although the resulting polymer is not ideal), but having to do the precise pouring and mixing, and trying to smear that thick blend onto the wood, hundreds and hundreds of times, is not something I want to do.
I want to enjoy the process of making the wooden utensil as much as I want to see the end result, hence my excuse to play with random metallic driers and resins.
Author here, I also bought a dehydrator to keep my finished spoons at 70C (158F) for 10 hours to speed up the curing of the tung oil. It really works wonders!
I prefer to keep the original color of the wood I sell, so lower temperatures are better for me, but I like the look of toasted wood as well.
My problem with just oil is that the finish is very matte, hence the wax and resin complication I'm going through in the article. But matte is also a look that people look for so there's no problem in that, it's just my personal preference and style that's different.
For example, I like how we can swipe down to show the exposure slider, then swipe left/right to adjust exposure. Maybe it would make sense to have these hidden sliders on all 4 sides: right side could show a focus slider, left side could be white balance etc.
In any case, even without that, it's my most used new app of the year. Thanks for giving us such a simple way to get good looking color grading out of the iPhone!
[1] https://www.instagram.com/alin.panaitiu
reply