Presumably, one of those Ikea items is made of stainless steel, which is an alloy of steel containing ~10-11% chromium.
There are a lot of coatings, metals, and metal alloys that are not safe to burn, including Galvanized Steel (Zinc), Stainless Steel (Chromium), and Magnesium.
Mapping down to the millimeter is great, but the conditions on track are continually changing. Weather (rain, sun, track surface temperature, air temperature), debris (dirt, grass, marbles, spectator thrown shoes), rubber being laid down on the track, changing condition of the driver's vehicle and other vehicles are all things that need to be contended with. Simulation helps, assuredly, and is used in human based efforts extensively, but you can't exactly just play back your simulation on a real track and expect the car to stay on course at race speed.
That's a good point, for instance, Google's car has both on-board sensors and annotated route information. I wasn't suggesting that offline simulations be replayed, but simply that the problem space is to some extent a more perfect knowledge environment than the open road will ever be. Cheers.
Probably easier than open road, but the surface is a constant problem. NASCAR for example runs multiple races at some venues where the spring and summer races act totally different. Some of the differences are heat, rain between practice and race (rubber on track difference), different tire formula, possible resurfacing, and changes to rules (aero or engine).
Restrictor plate racing with a computer car mixed in would be extremely interesting. NASCAR does not allow telemetry, speedometers, or fuel gauges. This would make for an interesting computer car in these parameters.
Maybe not exactly what you meant, but Raptr employs video game players (including a few pro/ex-pro players), and is a social network for video game players.
it was just barely on the Santa Clara side of Lawrence expressway (but not very far so) there's a highschool right there (willcox high? yeah. the place was about a block north of that.) go a few blocks further north (or, rather, a few blocks towards 101) and you get to the Lawrence caltrain station, which isn't a nice area, but isn't scary (I once lived in an apartment across the street from the Lawrence caltrain.) It was an older place, of course, and looked very suburban. I think it was closer to $350 than $300 but I'm certain it wasn't above $350 (We didn't look at anything that had an asking price higher than $350)
It wasn't big; just under a thousand squarefeet, if I remember right, not counting the garage or the shed. 3bdr, 2 bathrooms; one of the bathrooms was an un-permitted conversion of a closet. (oh man. so many houses in this area have been badly converted to hold more people than was originally intended.)
The roof was in fairly okay shape; it seemed structurally pretty good. It badly needed new carpet, appliances and paint inside and out.
When was last time you looked? Things are bad right now, I mean, if you are trying to sell; I looked at rather a large number of houses over a period of a few months (we stopped looking, oh, two or three months ago) nearly all the properties we looked at were either short-sales or bank owned. Most of the places we looked at? last sold for close to 2x the current asking price.
But yeah, there seemed to be plenty of livable stuff in the Sunnyvale area for under $350K, and it gets cheaper as you get closer to San Jose.
This wasn't the cheapest thing we looked at, but most of the cheaper single family homes had more significant problems like a roof that should have been replaced five years ago.
There was a very small 2 bedroom house on America over near arques and central expressway in sunnyvale. Well under $250 if I remember right, but it needed way more work than I wanted to put in. (incidentally, it also had a poorly-done bathroom addition; this one opening to outside. at least it was enclosed.)
I could go on for hours about all the poorly-done bathroom additions we saw. At one house, someone just took a toilet and plumbed it in to the corner of their enclosed back patio. They also had a completely free-standing shower insert plumbed in to the same area.
but yeah; in that price range you see a lot of stuff that needs a whole lot of work, but you will also find a few places that are livable with new carpets.
There are a lot of coatings, metals, and metal alloys that are not safe to burn, including Galvanized Steel (Zinc), Stainless Steel (Chromium), and Magnesium.